Wall Designing – Square Within, Square masking tape (step by step)

Wall Designing – Square Within, Square masking tape (step by step)


Masking tape (paint brush, masking tape) is
a paper strip treated on one side with a sticky substance. It has excellent heat resistance, after removal
from the base leaves no residue. Often used as protection for surfaces made
of glass, wood, plastic, metal. Due to its frost-resistant, heat-resistant
and moisture-resistant ability, the product is in demand among consumers, who often face
the question of how to properly glue a masking tape? HOW TO Glue THE TAPE WHAT WE PAY ATTENTION
TO! The first thing to consider is the type of
glue in the material used. It can be based on natural or synthetic rubber,
based on acrylic or silicone. Each of them has its own characteristics and
is suitable for various operating conditions. The masking tape should be adhered to, adhering
to the following recommendations, which can increase adhesion: a thicker layer of glue will increase the
adhesion force at times; high pressure will also positively affect
grip; glued surfaces should be made perfectly smooth;
paintwork base should be elastic. In order for the masking tape to last for
a long time and after removal does not leave any marks on the surface, it should be applied
to the prepared base, namely: clean, dry. Installation is carried out with sufficient
pressure, while the temperature should not be below 10 degrees above zero.

Leave a Reply