CORSAIR Lighting Node PRO – VIVID LIGHTING EFFECTS AND CUSTOM COLOR COMBINATIONS

CORSAIR Lighting Node PRO – VIVID LIGHTING EFFECTS AND CUSTOM COLOR COMBINATIONS


The new CORSAIR Lighting Node PRO is our latest RGB lighting controller that allows you to sync all of your RGB components, and in this video, I’m going to show you everything you can do with the Lighting Node PRO. To make insulation as simple as possible, we made the Lighting Node PRO as small as possible. Allowing you to tuck the controller away nearly anywhere in your chassis. The Lighting Node PRO features a single mini-USB port to communicate with your PC. Two separate channels for RGB LED strips or RGB fan hubs, and a single SATA-powered plug. The Lighting Node PRO also features on-board memory so that lighting effects can be stored directly on the device, and run without CORSAIR Link. Installing the Lighting Node PRO is quick and easy. First, plug the USB cable into an available header on your motherboard, plug the other end into the Lighting Node PRO Then, plug in the SATA power cable. Now you can start up CORSAIR Link! In CORSAIR Link, you’ll see a tile for “Lighting Node PRO.” Click on “Configure,” to get started. You can choose between RGB LED strips, HDRGB, or SPRGB fans from the component drop-down menu just to the right of the channel number. After you selected the component type on a channel, you can add the desired number of components to it with the “+” button. To start customizing your lighting, click on a component and use the options at the bottom of the screen to change the lighting modes, colors, and the speed of the effect. Once you’re done configuring a lighting mode, you can choose to apply to multiple components with the “Copy to…,” button. Just click “Copy to…,” and check the boxes next to the desired components you want to copy this mode to.The Lighting Node PRO has a total of six different lighting modes. Rainbow, color shift, color pulse, color wave, static, and temperature mode, which allows you to change the color based off of the temperature of your components. You can also control the brightness of each channel with the slider to the right. This controls the brightness of all components on that channel, so moving the slider all the way to the left will turn the lighting off for that entire channel. If you want to turn the lighting off of a particular component, such as an LED strip or an RGB fan, you can turn the lighting off by selecting the desired component, setting it to static mode, and select black for the color, and if you want to get creative, you can apply a different effect to each component. The Lighting Node PRO and the power of CORSAIR Link allow you to take control of all your CORSAIR RGB components, not just for aesthetics, but to enhance your system as well. Thanks for watching!

85 Comments

  • Podcas

    May 10, 2017

    wtf is dis shit

    Reply
  • Doraifu

    May 10, 2017

    I'love corsair J"ADORE CORSAIR

    Reply
  • AlawyI2

    May 10, 2017

    Corsair is the Corsair Harpoon Gaming Mouse really good for Gaming and taking too long but the Corsair M65 have a button for the shooter im not the people how like shooter games, sooo.. its good for FPS Games?

    Reply
  • GliffGaming

    May 10, 2017

    Enhance your system my ass

    Reply
  • ALittleDIMM

    May 10, 2017

    I love this device. You can get your tower to look pretty freaking cool.

    Reply
  • cicagiu

    May 10, 2017

    peperoni pizza is a lie

    Reply
  • Kylo Renzo

    May 10, 2017

    But when am I getting a Covering Marquee effect?? 🙁

    Reply
  • Paul Albao

    May 10, 2017

    oh…just like nzxt hue+

    Reply
  • DracoFight

    May 10, 2017

    Corsair, it's a great mark and i love this mark ;). Partner being with you : Wow

    Reply
  • QziT

    May 10, 2017

    What is the point in all this RGB crap they are producing, literally only the keyboard I have thats RGB

    Reply
  • LordBarrington

    May 10, 2017

    disappointed it wasn't george doing the video on something rgb

    Reply
  • ELiT3CH

    May 10, 2017

    Not just for aesthetics but to enhance your system (with aesthetics), lol, good product though, the software is the most important part of this so hopefully it's well implemented.

    Reply
  • Skruff

    May 10, 2017

    i feel bad because my ram has no leds 🙁 . not

    Reply
  • Celsian

    May 10, 2017

    If anyone is looking for a little more control over their lights search for "System Information Viewer" or "SIV." Check out one of my recent videos for a demo of what's possible.

    Reply
  • PJ Gaballo

    May 10, 2017

    This unit may actually beat the Hue+. This uses a SATA cable to power compared to the Molex power for the Hue+ which is very useful. It can also use different effects on specific channels. I would probably use this is my next rig.👍🏼

    Reply
  • Kusqen

    May 10, 2017

    Looks really good and i love corsair stuff, but the corsair link sucks

    Reply
  • Juho Petrell

    May 10, 2017

    If someone dont like RGB then dont buy it… Dont hate companies that make RGB products just becouse of that. So many people likes them, if you dont like them then dont scream like angry little child in social media flaming others that how stupid RGB is. Nobody cares. Companies produces what customers want. (Not everyone but Corsair does this most of the time.) If you dont like all of those flashing rainbow modes then dont just use them. There is other modes too, nobody is forcing you to go full rainbow. Btw its stupid to buy just white backlit keyboard and fans etc, becouse if you want to change your color theme in the future, you dont have to buy everything again. Its more like futureproofing. Btw RGB dont mean LED rainbows anywhere, it stands for Red, Green and Blue. With mix of those you can get 16,7million colors out of them and that is what i call awesome. You can choose any color you want, in any mode you want.

    Reply
  • MaxHBoss

    May 10, 2017

    They better start making mobos with 10 onboard USBs…

    Reply
  • Spooder-Man

    May 10, 2017

    Arduino + addressable LED strips = way better than this

    Reply
  • dopelicious

    May 10, 2017

    pls update utility engine 4 keyboards more, would be sick with new settings to make more complicated and cooler profiles!

    Reply
  • Tiduspeco

    May 10, 2017

    But…..how does it work with the SP120? o.O

    Reply
  • AmadeusL

    May 10, 2017

    Make this work with Corsair CUE then I'm in. Also please add gaming API to CUE so that our peripherals react to the games. Razer has had it for years!!!

    Reply
  • Dr. Acula M.D

    May 10, 2017

    So can you only plug in two things into this? Or do you chain them together?

    Reply
  • sk8ter4fun

    May 11, 2017

    is it possible to buy just an RGB strip if you already own the node?

    Reply
  • DaBukkit

    May 11, 2017

    incase anyone else was wondering where they knew this music from its traffic racer

    Reply
  • Icefly

    May 11, 2017

    wait… i got the node pro and the hd rgb fan. how do i connect them together?
    i searched for an hour what cables i need and stuff like that.

    Reply
  • GezeB

    May 11, 2017

    Corsair forever ^^ hope i ll can have it soon as possible in France 😉 Thx Corsair

    Reply
  • Dragon Purr

    May 14, 2017

    So how come the 3-button RGB controller that you can buy with the HD120 fans has 8 lighting effects, whereas the Lighting Node Pro only has a meager 6??? I would think that the LNP would be far more sophisticated than the 3-button controller and have 10 or 12 effects since it is updated through Corsair Link and Corsair can dispatch new updates along the way. Corsair has really been lackadaisical and lethargic with their updates to LNP. It also needs an audio/music mode like NZXT Hue+ CAM software, which currently has 8 lighting effects, I believe.

    Reply
  • Lenin Zapata

    May 14, 2017

    Awesome

    Reply
  • Sean Lim

    June 5, 2017

    Can i connect more than 1 Corsair Lighting Node Pro to single PC?
    I would like to use it for my desk as well

    Reply
  • Stalewind Farto1078

    June 17, 2017

    Totally stock 570 says, Hmmm

    Reply
  • Andreas

    June 30, 2017

    How many HD fans can you connect to this unit?

    I can't find any information about it

    Reply
  • Sergio Marquez

    July 10, 2017

    doesn't work with my sp120's :/

    Reply
  • deep

    July 18, 2017

    White lights.?

    Reply
  • will j

    July 22, 2017

    I just bought this and it doesn't work. Only 1 of 4 light strips light up, and the corsair link software no longer recognizes the lighting/node. I tried reinstalling corsair link, checked all connections, tried updating the firmware… so after wasting 4 hrs of my time, still nothing. Truly the worst product ive ever bought from corsair. Now off to drive a 50 miles to return this defective garbage.

    Reply
  • esteban ballesteros

    July 26, 2017

    can i controller the speed of my fans in the software?

    Reply
  • Bartosz p

    August 2, 2017

    how do i connect my 3 hd120s with the node pro controller?

    Reply
  • RCAddict

    August 18, 2017

    Make the vengeance rgb ram sync able with the led strips please

    Reply
  • Pootin Plays

    August 24, 2017

    how is the white?

    Reply
  • Konrad Mroczek

    September 15, 2017

    Can You sync it with music?

    Reply
  • Kerem AYTAÇ

    October 8, 2017

    Audio effect?

    Reply
  • N Gauge England -Synthematix-

    October 21, 2017

    so the node pro can work with 12 rgb fans in total then 6 on each channel? where do i buy the additional 6 fan module?

    Reply
  • Manos Mavrakis

    October 27, 2017

    If i don't have an available USB 2.0 header on pc motherboard how i can connect the Lighting Node PRO to work properly ? With some kind of splitter for example ?

    Reply
  • Mario Pardo

    October 31, 2017

    Hi, what case is this?? I ahve the 400c and I'm interested in the glass front.. The cases seem identical apart from this

    Reply
  • shshankk

    November 5, 2017

    i want music effect….

    Reply
  • N Gauge England -Synthematix-

    November 7, 2017

    wait the node can control 6 strips per channel? like in this video?

    Reply
  • saito hitokiri

    December 13, 2017

    hello i have lighting node pro ( got the kit 3 fan LL serie Kit ) but its not reconized inside corsair link 4 ?? do you know why ?? please help

    Reply
  • Tastee

    December 23, 2017

    My RGB strips(corsair ones) refuse to work!

    Reply
  • Fischdog

    January 8, 2018

    Mine caught on fire, Does anyone know why this would happen, followed all the instructions on the provided Manuel, turned my computer on and it caught on fire, if anyone knows why please respond,
    Thanks

    Reply
  • Elvis Best

    February 22, 2018

    how come mine wouldnt let me add more than 4 led strips

    Reply
  • Indy Bennink

    March 6, 2018

    Is the node pro also compatible with the LL120 fans from corsair??

    Reply
  • Mennooowww

    March 17, 2018

    when it has to led ports how do you connect 4 led strips and 2 fans?

    Reply
  • Todd Howard

    April 3, 2018

    Corsair fix audio sync next update!!!

    Reply
  • ZettiHDz

    April 4, 2018

    Would be fantastic if I could ever get the damn thing to work all the time

    Reply
  • S_Seiya

    April 15, 2018

    Can the sp120 fans do rainbow effect using this? I wanna buy the 460x but it comes with sp120 fans not hd120 fans.

    Reply
  • FROZEN

    April 16, 2018

    Hey team corsair.. I installed the Lightning node pro, but it does not show on my corsair link… What should I do?

    Reply
  • Gregory Dale Mostella

    April 27, 2018

    Enjoying your videos… Is the Lightning Node Pro limited to a set number of light strips? Can the Node Pro handle RGB fans on one channel and LED strips on the other?
    Thanks. New subscriber.

    Reply
  • Krajstof SW

    May 2, 2018

    add music effects !!!

    Reply
  • Ken Dy

    June 1, 2018

    this led can sync with aura ?

    Reply
  • Mr-Skipz-

    June 9, 2018

    So i dont need a commander pro. For 6 fans of rgb.

    Reply
  • Jenday Mate

    June 10, 2018

    i bought 2x 120 LL fans and each one came with in its own box
    so i didnt got the node pro or the other controller that came in the 3x fan pack
    what do i need to buy to connect ONLY this 2 Rgb cables that came with the fan?
    do i need to buy only the Lighting Node PRO and it will work?
    i dont need to controll the fans just want the fan RGB to work

    Reply
  • Hancké le Roux

    June 12, 2018

    How many lighting strips can be connected onto on one outlet of the lighting node pro?
    Would really appreciate help.

    Reply
  • tungruffel

    June 24, 2018

    So, two strips or two fans or one of each? Not two of each?

    Reply
  • Isaiah Santana

    June 25, 2018

    But where is music mode?

    Reply
  • SuNSe7

    July 6, 2018

    for 6 ll120 fans and 2 LED strips ill need 1x- CORSAIR Lighting Node PRO and 1x- CORSAIR RGB Fan LED Hub, and be able to sync then with corsair link ?

    Reply
  • Aldhy

    August 24, 2018

    Can you help me with your product, if i wanna use H100i pro rgb, and 1 single pack LL 120 fan, and 1 single pack LL 140 fan. Should i must using lightning node? Or i dont need, just need software to control and change rgb colour? Thx

    Reply
  • Konrad Götze

    September 26, 2018

    Do I need a Lighting Node Pro if I have a MSI Mainboard with a Corsair RGB Header?

    Reply
  • BuTcHeR Redalert

    November 12, 2018

    can i use this to sync 9 fans?

    Reply
  • Oscar Carlsson

    November 23, 2018

    can you use iCue?

    Reply
  • EVRRIPPER

    December 13, 2018

    does the node pro work with non corsair fans?

    Reply
  • TroutCatcher87

    January 1, 2019

    WE WANT MUSIC EFFECTS CORSAIR PLZ ADD MUSIC SYNC NEXT UPDATE ON THE SOFTWARE!!!!!!!!

    Reply
  • Norbert Kwaśniewski

    January 2, 2019

    Does it matter in wich order i connect the stips? like is it 1,2,3,4 or just random?

    Reply
  • Konphetty

    January 4, 2019

    I have 4 fans. Only 2 of them turn on. The one plugged in 1 and 2. But not 3 and 4

    Reply
  • 30000 subscribers without a video

    February 5, 2019

    I can’t do that

    Reply
  • Bobby Womack

    February 21, 2019

    Why is it missing on Amazon and hard to find on your site now. Are you working on a newer model?

    Reply
  • Jucarge

    March 10, 2019

    There's any any way to download more effects?

    Reply
  • Jaolu

    March 12, 2019

    Why Link instead iCUE?

    Reply
  • Brandon Tucci

    April 19, 2019

    Bought Corsair 680x case and have 6 LL 120 fans connected to hub, ive checked and checked and everything is connected properly yet I can’t get the lighting to come on on the fans just fans spin. Please help.

    Reply
  • iceby

    April 24, 2019

    The shit costs 50 bucks

    Reply
  • DeanRendar84

    April 26, 2019

    Headers are cramped as it is on a non RGB pinned mobo. I better be able to add this to a system with pre existing rgb controllers on my USB 2.0 header, otherwise everything today was a waste of time

    Reply
  • Remigius Polański

    August 5, 2019

    So i bought 3 fan pack with hub and i got node, worked just fine untill i added 4th fan (same type) it got rgb glith that will not change no matter what.

    Reply
  • yeet

    November 11, 2019

    Are they compatible with icue?

    Reply
  • Joseph FourtyFour

    December 2, 2019

    Is there way you can link the background track for this video, very relaxing.
    Thank you.

    Reply
  • Not My Name

    December 24, 2019

    You wouldn’t happen to have a free pc because I keep being drawn to these types of videos with no money

    Reply
  • Coleallen Harnden

    January 1, 2020

    0:50 where is this?

    Reply

Leave a Reply